- Product number
- AT-907
- Brand
- Kunst & Dünger
- Material
- Toughened safety glass, 4 mm
- Weight
- 0.72 kg
- Width (total)
- 33.7 cm
- Height (total)
- 21.5 cm
- Delivery status:
- Ready for shipping
- Delivery time:
- 5 – 10 Days
- Weight:
- 0,720 kg
Glass rather than plastic: A door sign in glass reads differently from one in acrylic, and no coating replaces that difference. Glass stays clear for years, while plastic yellows and collects fine scratches. In law offices, surgeries and reception areas that is why glass gets chosen despite the higher price.
The edges: All four edges are bevelled at 45 degrees and polished. That is a visual feature first, because the bevel refracts light and gives the sign depth. It is a practical one too: a ground edge is less prone to chipping than a raw cut.
Safety glass: The material is toughened. Should it ever break, it falls into blunt granules rather than shards. On signs at head height beside a door that slams daily, that is not a theoretical argument.
Three ways to letter it: You can have the glass printed directly, laminate a printed film, or use it as a sandwich with a paper insert. The third is the most flexible, because a change of name then costs no more than a fresh sheet of paper.
When names change: Where responsibilities move around, a directly printed sign is a permanent commitment. For departments and room numbers that is right. For personal names the sandwich solution is usually the more sensible choice.
Formats: Three standard sizes are available, from a narrow portrait for room numbers to an area that takes a full line with name and function. Special sizes are possible above a minimum.
Mounting: Fixing is by standoffs or by adhesive pads on smooth surfaces. On glass and metal doors the adhesive version holds well; on powder-coated or textured surfaces you should use screws.
Care: Glass cleaner and a soft cloth. Unlike plastic signs, glass also takes the alcohol-based cleaners common in medical practices without going dull.
Before ordering: Check whether the door offers enough flat area beside the fittings. A glass sign needs a continuously level surface, because it will not conform to a curve.
Handling: Toughened glass is robust in the face but sensitive at the edges. Do not stand a panel on a hard floor while working; a knock on the corner is what usually breaks it, not pressure on the surface.
This item in detail: The height is 215 mm and the width 337 mm. This format is intended for short entries such as room numbers, abbreviations or single names. The weight is 0.72 kg, which matters for both the fixing and the shipping. The sign is bonded or set on standoffs. Check the dimensions and finish against what you already have before ordering, because the items in this range differ in exactly those points.