Anti-Panic Adapter for Barrier Belts in Black, Releases the Belt End under Pressure, for All Stopper Series

Where a post would be too much: Not every barrier needs a post at both ends. Where the belt runs to a wall, a wall clip is enough. It receives the band like the head of a post, costs a fraction and stands in nobody's way. In narrow passages it is often the only solution that fits at all.

The wall clip: The matt black version suits all belt cassettes in the Master series. It is mounted on the wall and the band from the opposite post is hooked into it. You can equally use it as the fixed starting point of a run and continue from there with free-standing posts.

The anti-panic adapter: It can be retrofitted to all Stopper series, meaning Master, Point, Twin and the wall clips. A magnet and its counterpart are fitted to the belt end and the receiver. In normal use the connection holds reliably; under sufficient pressure it releases.

Why that matters: A belt that does not give way in an emergency becomes a trap. As soon as a barrier stands in an escape route or across a direction of exit, the adapter belongs with it. That is not a question of equipment but of the operator's duty of care.

Retrofit rather than replace: Both parts fit existing systems. Anyone already running Stopper posts need not replace anything and can extend an existing layout step by step.

Quantity: The adapter is needed per belt end. Count the bands, therefore, not the posts. On double systems such as the Twin that means two per post-to-post connection.

Mounting the wall clip: Its height follows the posts it works with, so the band runs level. A belt hanging at an angle pulls sideways on the cassette and retracts unevenly.

Substrate: The usual fixings supplied suit concrete and solid brick. For plasterboard, tiles over a cavity or timber stud walls, choose the plug to match the wall, because here the belt pulls sideways rather than down.

Ordering: Wall clips and adapters are small parts that are easily forgotten in planning and then hold up a whole installation. Count them together with the posts rather than ordering them afterwards.

This item in detail: The finish is black. The weight is 0.052 kg, which matters for both the fixing and the shipping. The part supplements existing Stopper installations. Check the dimensions and finish against what you already have before ordering, because the items in this range differ in exactly those points.