Display Bar 300 mm in Silver Anodised Aluminium, Carries Signs, Panels and Shelves, for Cable Systems

The connecting part: The display bar is a cross member in a Soistes set-up. It bridges the gap between two cables or two profiles and creates the support on which signs, panels and shelves rest. Without such a piece a cable system stays limited to single points.

What it is needed for: Whenever something is wider than the spacing of two holders. A sign forty centimetres wide hung from two points tilts and swings. On a cross bar it rests along its full length and stays still.

Length: Three hundred millimetres. That is deliberately not a special size but the width that suits the common formats of the system while still spanning freely without sagging.

Material: Silver anodised aluminium. The finish matches the frames and profiles of the range, so the bar does not stand out as a foreign part in an assembly. Anodised aluminium keeps its colour and does not tarnish.

How many: Allow one bar per support point. A shelf needs at least two, top and bottom, otherwise the surface tips forward as soon as anything is placed on it.

Levelling: Check level on the bar itself rather than on the frame. A frame can stand slightly out of true without anyone noticing; a shelf inside it that is out of true reads immediately as carelessness.

Combinable: The bar works with the holders of the range and fits both tensioned cable systems and the wheeled frames.

Reordering: Anyone rebuilding a system often should keep bars in stock. They are the part that regularly turns out to be one short during a rebuild, because the layout has changed.

Care: A damp cloth. Abrasives leave dull marks on anodised surfaces that cannot be matched back in afterwards.

What else you need: The bar goes together with the holders that fix it to the cable or into the frame. Both are ordered separately, and a set-up missing its holders cannot be improvised together.

Planning the spacing: Decide the vertical spacing before you fit anything. Moving one bar later means moving everything below it, because the spacing between levels is what makes an assembly look deliberate.

This item in detail: The weight is 0.244 kg, which matters for both the fixing and the shipping. The bar bridges the gap between two cables. Check the dimensions and finish against what you already have before ordering, because the items in this range differ in exactly those points.