Standoff for Clamping 25 mm, Set of 4, for Wall Mounting Indoors and Outdoors, Company Signage

This wall-mounted holder clamps the sign rather than drilling through it. Printed panels, company plates, door and glass signs are held steplessly and securely, whatever the material thickness.

This item in detail: This part measures 25 mm. The weight is 168 grams. It is supplied as a pack of 4, with the quantity stated in the title. Check these figures against your installation before ordering, because the parts in a range differ in exactly these points.

Why no hole matters: Glass does not need drilling, which saves breakage risk and custom orders. On printed panels the artwork stays intact, and swapping a sign takes seconds instead of a new installation.

Sandwich build: A paper insert can be clamped between two panes of glass. That gives you a sign whose content you print yourself and change at any time — handy for changing names, opening hours or notices.

Dimensions: 25 mm — giving a wall gap of 25 mm. Material: Metal.

How many holders you need: A sign usually takes four holders, one per corner. Narrow portrait formats manage with two, and on large panels from about a metre edge length you should plan an extra holder in the middle of the long side. So 4 pieces fit out around 1 signs.

On mounting: Drill the hole to suit the plug for your wall material — the holders themselves do not dictate a plug size. Plasterboard calls for cavity plugs, concrete takes a standard plug. Align the first holder with a spirit level; after that the sign itself carries the alignment across.

Scope of delivery: You receive 4 pieces. The price shown applies to the whole set of 4, not to a single item.

Why it matters: Drilling glass means risk of breakage and custom fabrication. The clamp holder instead grips the edge, so you can use standard panes, including cuts you source yourself. Sandwich build: A printed paper insert can be placed between two panes. The content stays changeable without anything being remade. Useful for prices, opening hours or changing names. How many do I need: Two clamp holders carry a smaller sign, four give the necessary security on larger formats. From about one metre edge length, add one in the middle. Care: Clean glass and holder with a damp cloth. Avoid abrasives, they leave marks on both materials. How it is supplied: The clamp holders come in packs, with the quantity given in the title. Because two to four holders are needed per sign, one pack usually covers several panes. The glass itself is not included; it can be cut to size by a glazier or bought in the trade.