Standoff with Adhesive Click System dia. 20 x 20 mm, Pack of 500, for Wall Mounting Indoors and Outdoors

This standoff fixes 3D letters and contour-cut shapes to the wall without a hole through the artwork. The holder stays hidden behind the letter.

This item in detail: This part measures 20 x 20 mm. The weight is 1.72 kg. It is supplied as a pack of 500, with the quantity stated in the title. Check these figures against your installation before ordering, because the parts in a range differ in exactly these points.

How it mounts: The letter or shape is fixed straight onto the head of the holder with silicone, double-sided tape or liquid adhesive. The tip of the head scores the drilling position on the wall, so every hole ends up exactly where it belongs. The sleeve is then mounted in the wall and the panel clicks in.

What it suits: Company lettering in reception areas, logos on facades, cut-out signage in shop fitting. Wherever the fixing should stay invisible and the artwork appears to float in front of the wall.

Dimensions: dia. 20 x 20 mm — giving a wall gap of 20 mm. Material: Metal.

How many holders you need: A sign usually takes four holders, one per corner. Narrow portrait formats manage with two, and on large panels from about a metre edge length you should plan an extra holder in the middle of the long side. So 500 pieces fit out around 125 signs.

On mounting: Drill the hole to suit the plug for your wall material — the holders themselves do not dictate a plug size. Plasterboard calls for cavity plugs, concrete takes a standard plug. Align the first holder with a spirit level; after that the sign itself carries the alignment across.

Scope of delivery: You receive 500 pieces. The price shown applies to the whole pack of 500, not to a single item.

How many do I need: For individual letters one holder per letter is usually enough; wide letters such as M or W take two. For a continuous logo allow four holders, or two for narrow portrait formats. Mounting: The holder goes on the wall first, then the letter is bonded to its head. Which fixing suits depends on the wall material, not on the holder. Align the first holder with a spirit level and the alignment carries across. Which adhesive: Silicone stays permanently elastic and forgives small movements, double-sided tape holds instantly with no curing time, liquid adhesive gives the firmest bond. Which one fits depends on the letter material. Care: A damp cloth is enough. Avoid abrasives, they leave scratches on the visible head. How it is supplied: The holders come in packs, with the quantity stated in the title. That makes sense because letter and logo installations need several anyway, and reordering halfway through holds up the job. Allow a few spare holders and a later addition to the lettering is covered as well.