Photo Stand 10 x 15 cm Made of PLEXIGLAS, a Frameless Acrylic Picture Frame and Photo Holder for 2:3 Prints

The 10 x 15 cm photo stand takes the print that every photo service delivers as standard: the portrait format in the 2:3 aspect ratio produced by 35 mm film, DSLR and mirrorless cameras. The stand is a frameless picture frame made of crystal-clear PLEXIGLAS^® XT, 2.0 mm thick. The photo fills the surface edge to edge; there is no frame, no backing board and no clips. What you see is the picture itself, carried by a pane that almost disappears in the room.

Construction and handling: The photo stand is bent from a single piece. It needs a footprint of roughly 10 x 6.5 cm, the base carries four anti-slip feet, the inclined pane holds the photo. The print slides in from the top behind the pane and rests on the lower edge by itself; changing the picture takes a few seconds and needs no tools. At 86 g the stand is light enough for the windowsill and stable enough for a desk that is used every day.

Material: PLEXIGLAS^® is the original among acrylic glasses. It is UV-stable, does not yellow even after years by the window and is considerably more break-resistant than glass of the same thickness. The edges are diamond-polished and shine like ground glass; fingerprints wipe off with a soft cloth and a little water. Avoid glass cleaners containing alcohol and abrasive agents, and the pane stays permanently clear.

Typical applications: At home the photo stand sits on the bedside table, sideboard and shelf, where a family photo or the picture from the last holiday finds its place without drilling or nails. As a gift for a birth, a wedding or an anniversary, a single print and the stand become a finished present. In retail and hospitality the same stand keeps notice and promotion cards in 10 x 15 cm format ready on counter and table, photographers use it to present proof prints from the shoot, and at events it carries place cards or the guests' photos.

The right size: 10 x 15 cm is the format for prints from camera and photo service. Smartphone photos are usually taken in the 3:4 aspect ratio; for these the range offers the 11 x 15 cm photo stand, which takes that format edge to edge. Altogether the photo stand range covers portrait, landscape and square formats from 9 x 11 to 45 x 30 cm, so every print gets a stand that fits exactly.

Brand and manufacture: The photo stand belongs to the homeBLOCKrocks^® home brand and is manufactured by VITAdisplays^® in Germany. Larger quantities for branches, hotels or events are available, as are custom sizes on request.